The MIG5000H is one of our larger portable welders. With a rated output of 500a, this machine is great in large type maintenance like hangers shipyards, large vehicles, etc. With a separate wire feeder that comes with it, this machine is still able to be moved around if need be, but the light wire feeder can be stretched away from the machine as well for a great distance of reach to maneuver around whatever you may be working on. With a maximum spool diameter of 12", and wire feeder speed of 800 IPM, it can be used for extended periods of time and also never slow the user down by lack of wire. The MIG5000H is a powerful, reliable MIG Welder that will get you to the end of any job you start with power and reliability.
DUE TO AN ERROR AT OUR PRINT SHOP, THIS PRODUCT PACKAGING WAS PRINTED WITH AN INCORRECT BARCODE AND MAY CONTAIN OTHER EXTERIOR PACKAGE PRINTING ERRORS SUCH AS UPC CODE AND IN AT LEAST ONE CASE AN INCORRECT INPUT POWER RATING WAS PRINTED, ANY OF WHICH PREVENT US FROM SHIPPING IT TO DEALERS OR DISTRIBUTORS FOR RETAIL SALE.
THIS IS YOUR OPPORTUNITY TO SAVE A BUNDLE AND PURCHASE BELOW COST AS WE NEED THE WAREHOUSE SPACE FOR MORE EQUIPMENT. THIS EQUIPMENT IS OTHERWISE BRAND NEW AND FULL FACTORY WARRANTY APPLIES. DUE TO LIMITED QUANTITIES THESE ARE SOLD ON A FIRST-COME, FIRST SERVED BASIS SO WHEN THEY'RE GONE , THEY'RE GONE FOR GOOD.
BY PURCHASING THIS ITEM YOU UNDERSTAND THAT THE PACKAGING WILL CONTAIN AN ERROR IN PRINTING AND YOU ARE GETTING A MASSIVE DISCOUNT FOR ACCEPTING PRODUCT WITH AN OUTER PACKAGE PRINTING ERROR. PLEASE REFER TO CORRECT DESCRIPTION BELOW FOR SPECIFICATIONS ON THIS MACHINE.
| Model MIG 500H |
|
| General Description / Title |
MIG 500H WELDER; WITH SEPERATE WIRE FEEDER WELDER |
| Applications / Uses |
LIGHT METAL FABRICATION; INDUSTRIAL; EDUCATION / TRAINING; MAINTENANCE & REPAIR |
| Safety Feature |
LOW AMP SAFETY START |
| Weldable Metals |
MIG/ STEEL, STAINLESS & ALLOYS; STICK / STEEL, STAINLESS & ALLOYS |
| Material Thickness |
NA |
| Processes |
MIG (GMAW); FLUX CORE (FCAW); STICK/ ARC (MMA); ARC GOUGING |
| Input Power |
440/480V |
| Current Type |
DC |
| Input Hz |
50 Hz; 60 Hz |
| Input Phase |
3-PHASE |
| Amperage Range |
60A -500A |
| Recommended Minimum Wire Size |
0.035" HARD WIRE; 0.045" FLUX CORE |
| Recommended Maximum Wire Size |
0.062" HARD WIRE; 0.062" FLUX CORE |
| Maximium Spool Diameter |
12" |
| Spool Gun Ready |
NO |
| Wire Feed Speed Maximum |
800 IPM |
| No Load Voltage |
70V |
| Maximum Operating Voltage |
40V |
| Rated Output |
500A |
| Weld Output Constant Current |
STICK / TIG |
| Weld Output Constant Voltage |
MIG |
| Duty Cycle |
100% |
| Measurements |
29" X 12" X 22"; 24 X 8 X13 |
| Weight |
85 LBS; 33 LBS |
| Shipping Weight |
92 LBS; 52 LBS |
| Shipping Size |
31" X 16" X 24"; 22" X 13" X 20" |
| Comes Complete with |
10 FT (3M) POWER CORD WITH NO PLUG; 10 FT (3M) MIG GUN ; 10 FT (3) GROUND CABLE WITH DINSE CONNECTOR; GAS FLOW METER; SEPARATE WIRE FEEDER WITH 16 FT LG UMBILICAL CORD |
| Gas |
MIG - ARGON MIX; MIG - CO2 |
| Air Compressor Required |
NA |
| Air Volume (CFM) |
NA |
| Maximum Cutting Thickness |
NA |
| Maximum Sever Thickness |
NA |
| Start Type |
MIG TRIGGER START ; STICK SCRATCH START |
| Portability |
NA |
| Warranty |
2 YEARS |
| Extras |
NA |
| Accessories Available |
LONGER MIG GUNS; DINSE ADAPTERS; WELD CABLE EXTENSIONS; MIG ACCESSORIES; 10 FT (3M) ELECTRODE HOLDER WITH DINSE CONNECTOR |
